Sending a Fax by Automatic Dialing
Sending a fax by Direct Keypad Dialing
You can also enter a full number with the number keys and then press the
START key to begin dialing. You can use this method to dial a full number
when you don't need to speak to the other party before faxing.
1 Load the document(s).
| RESOLUTION/ |
• If desired, press | RECEPTION MODE |
to set the |
resolution and/or contrast.
READY TO SEND
2 Enter the number of the receiving machine by pressing the number keys.•If a pause is required between any of the digits to access a special service
FUNCTION
or an outside line, press . The pause will appear as a hyphen (two seconds per pause). Several pauses can be entered in a row.
3 Check the display. If the number of the receiving machine shown iscorrect, press START .STOP
•If the number is not correct, press to backspace and clear one digit at a time, and then
46