Manuals / Brands / Computer Equipment / Fax Machine / Sharp / Computer Equipment / Fax Machine

Sharp FO-3150 Copy Cut-off, once, STOP, Press, Press, twice, Press, Press, once and, once and, COPY/HELP, four times, 2 to set copy, will not be printed), or

1 124

Download 124 pages, 3.79 Mb

Making Copies


3 When you are ready to begin copying, press		COPY/HELP
3 When you are ready to begin copying, press		.

If MEMORY IS FULL appears...

If you place a large number of originals in the feeder, the memory may become full before all pages can be scanned (the display will show MEMORY

IS FULL). If this happens, press START to copy the pages that have been

scanned, and then repeat the copy procedure for the remaining pages, including the page that was being scanned when the memory became full.

Copy Cut-off

When making a copy of a document that is longer than the printing paper, use the copy cut-off setting to select whether the remaining part of the document will be cut off or printed on a second page. The initial setting is YES (cut off the remainder). To change the setting, follow the steps below.

1		FUNCTION		Display:
		FUNCTION
	Press	once and	four times.	PRINT SET-UP
2

	Press	once and	twice.
	Press	once and	twice.	COPY CUT-OFF
3

	Press	once.
	Press	once.		1=YES, 2=NO
4

	Press	1 to set copy cut-off to YES		The display briefly shows
	(the remaining part of the document			The display briefly shows
	(the remaining part of the document			your selection, then:

	will not be printed), or		2 to set copy	LIFE COUNTER
	cut-off to NO (the remaining part will be
	printed on a second page).

STOP

5 Press to return to the date and time display.

4. Making Copies

67

Contents

MODEL Page Introduction Automatic dialing Rapid Key Dialing: 10 numbers Speed Dialing: 99 numbers Memory size Paper tray capacity Halftone (grayscale) Compression scheme Input document size Automatic feeding: Important safety information Page Table of Contents 6. Special Functions Printing Lists Maintenance 9. Troubleshooting Quick Reference Guide A Look at the Operation Panel 8COPY/HELP key 9RESOLUTION / RECEPTION MODE key 10FUNCTION key 11SPEED DIAL key 12HOLD key 1. Installation Unpacking Checklist Points to keep in mind when setting up Connections Connecting the handset Connecting the power cord Connecting the telephone line cord Attaching the paper trays Page Extension phone (optional) Installing the Toner Cartridge 4 Hold the toner cartridge by the handle Resetting the toner counter Resetting the drum counter Loading Printing Paper 5 Insert the stack of paper firmly into the tray, print side up Important: print 6 Make sure the stack of paper is aligned Push the paper release lever back down Setting the paper size Entering Your Name and Fax Number 4 Enter your fax number by pressing the number keys (max. 20 digits) 5 Press START 7 Press 8 Press to return to the date and time display Setting the Date and Time Page Daylight Saving Time Setting the Reception Mode Setting the reception mode Volume Adjustment Speaker Handset Ringer Beep length 2. Sending Faxes Transmittable Documents Size and weight Other restrictions Loading the Document Removing a document from the feeder Adjusting the Resolution and Contrast Resolution settings Contrast settings 1 Load the document(s) one or more times until the desired resolution and contrast settings appear in the display Changing the default resolution Sending a Fax by Normal Dialing Sending a Fax by Automatic Dialing Storing fax and phone numbers for automatic dialing Press START and go to Step 7. If not, enter the desired two digit number , and go to Step Editing and clearing auto-dialnumbers Make the desired changes to the name 8 Press START Rapid Key Dialing Speed Dialing Searching for an auto-dialnumber Sending a fax by Direct Keypad Dialing Redial Automatic redialing Recall interval for automatic redialing Recall times for automatic redialing Error Correction Mode Cover Sheet Header message Batch Page Numbering Broadcasting (Sending a Fax to Multiple Destinations) Broadcasting using a Group Key Storing numbers in Group Keys Page If the memory becomes full 3. Receiving Faxes Using FAX Mode Changing the number of rings Using TEL Mode Answering with the fax’s handset Note: Answering on an extension phone connected to the same line Putting a call on hold Optional Reception Settings Fax Signal Receive Changing the number for remote fax activation Reception Ratio Substitute Reception to Memory 4. Making Copies Copy Cut-off 5. Answering Machine Connection Connecting an Answering Machine Changing the outgoing message Using the Answering Machine Connection How answering machine mode operates Optional A.M. Mode Settings Quiet Detect Time 7 times Enter a number from 01 to 10, or enter 00 to turn off the function Example: 3 seconds Quiet Detect Start Time On TAD Failure 6. Special Functions Distinctive Ring (Requires Subscription to Service) 6 Set the reception mode to FAX Blocking Reception of Unwanted Faxes Editing and clearing anti junk numbers Polling (Requesting a Fax Transmission) Requesting transmission Being polled (Memory polling) 1 Load the document to select SET 7 Set the reception mode to FAX (press until the arrow in the display points to FAX) Clearing a memory polling document Polling security Storing fax numbers for polling permission Editing and clearing polling permission numbers 7. Printing Lists Activity Report Telephone Number List Group List Setup List Transaction Report Transaction Report print condition Auto print-outof Activity Report 8. Maintenance Scanning glass and rollers The housing Replacing the toner cartridge Replacing the drum cartridge Viewing the total number of pages printed Replacing the drum cartridge •Caution 4 Remove the new drum cartridge from 6 Replace the toner cartridge and close the print compartment cover (see page 15). When finished, reset the drum cartridge counter as explained on page Cleaning the drum cartridge 5 Gently wipe the surface of the drum with the rolled-uppaper to remove any particles of toner caked on the drum 6 Replace the drum cartridge, holding the tabs on the drum cartridge handle with both hands 9. Troubleshooting Problems and Solutions Line error Dialing and transmission problems Reception and copying problems General problems Answering machine connection Messages and Signals Display messages Page Audible signals Clearing Paper Jams Clearing a jammed document Clearing jammed printing paper 7 Gently pull the jammed paper out of the machine Page FCC Regulatory Information MATERIAL SAFETY DATA SHEET (1/4) MATERIAL SAFETY DATA SHEET (2/4) MATERIAL SAFETY DATA SHEET (3/4) MATERIAL SAFETY DATA SHEET (4/4) Quick Reference Guide Guía de referencia rápida Index Page Page Page Page NOTICE Sharp Plaza, Mahwah, New Jersey 1-800-BE-SHARP http://www.sharpusa.com FOR YOUR RECORDS