Sharp FO-B1600 Automatic redialing, Once. Redial appears in the display, followed by

Sending a Fax by Automatic Dialing

Redial

You can automatically redial the last number dialed on the fax machine. This procedure can be used to send a fax or make a phone call.

1 If you are sending a fax, load the document(s).

	• If desired, press RESOLUTION/		to set
		RECEPTION MODE
	the resolution and/or contrast.
			READY TO SEND
2	Z	once. <REDIAL> appears in the display, followed by the
	Press REDIAL
	last number dialed. Make sure the number that appears is the number
	you wish to dial.
3			START/
	If you are sending a fax, press		MEMORY . Dialing begins.

If you are making a phone call, lift the handset. Dialing begins.

Sending	Faxes
2.

Automatic redialing

If you use automatic dialing (including Direct Keypad Dialing) to send a fax and the line is busy, the fax machine will automatically redial the number. The fax machine will make three redial attempts at intervals of five minutes. During this time, RECALLING will appear in the display, followed by a two-digit number assigned to the fax job. You will not be able to dial any other locations while the message appears.

♦You can press STOP to clear the message and stop automatic redialing.

♦Under certain conditions (for example if a person answers the call on a telephone), automatic redialing may stop before three redialing attempts are made.

49