Sharp FO-B1600 Quiet Detect Start Time, Press Function once, Press once and 6 times

Optional A.M. Mode Settings

Quiet Detect Start Time

This setting can be used to delay the start of the Quiet Detect Time function. For example, if you want to insert a pause at the beginning of your answering machine’s outgoing message to ensure clear detection of fax signals, you can use this setting to delay the start of silence detection so that the pause will not cause the fax to take over the line.

Quiet Detect Start Timing has been set to five seconds at the factory. You can change this setting by entering a 2-digit number equal to the desired number of seconds of the delay, or turn the function off by enttering 00. As general guide, the delay time should be slightly longer than the pause before the outgoing message.

1 Press FUNCTION once and	Display:
	3 times.
	OPTION SETTING

2 Press once and 6 times.

QUIET START

3 Press once.

ENTER (00-15) 05

4 Enter a 2-digit number (from 01 to 15) for the number of seconds of the delay, or enter 00 to turn off the function.

Example: 3 seconds 0 3

The display briefly shows your selection, then:

ON TAD FAILURE

5 Press to return to the date and time display.

STOP

70