Sharp FODC525, FODC600 Deleting a set, Press, Press, Press, and then, to select, . and then, select CLEAR, FAX TRANSFER SETTING, 1 Press MENU and then

Inbound Routing

14 To activate the set immediately, make sure that ACTIVATE NOW is

START/

selected in the display and press ENTER .If you do not want to activate the set, press or to select

START/

ACTIVATE LATER and press ENTER .

STOP

15 Press repeatedly to return to the date and time display.Deleting a set

♦To delete a set, you will need to know its number. To check the number, print the Fax Transfer List as explained on page 212.

♦To delete a set that was created in a personal book, open the book before performing the steps below.

3. Network Scanner

1 Press MENU and then or

until ENTRY MODE is selected in the display.

Display:

MENU MODE 1:RECEIVE MODE 2:LISTING MODE 3:ENTRY MODE

2	Press	START/	and then	to select		ENTRY MODE
		ENTER				07:SYSTEM # MODE
	FAX TRANSFER SETTING.					08:STORE JUNK FAX #
						09:DEPT. PASSCODE
						10:BOOK ENTRY MODE
						11:FAX TRANSFER SETTING
		START/				FAX TR		SETTING
3	Press		. and then	or	to	3:EN	ANSFERYMODE
		ENTER				1=SET		, )
						ENTER #(01-10,
	select CLEAR.					2=CLEAR
						3=ON/OFF
4	Press	START/				FAX TRANSFER CLEAR
						SETTING #=
		ENTER .

107