Sharp FODC525, FODC600 Press, Chain Dialing, Example: SHARP, 11 Press or to select “YES” if the number programmed is an, regular fax number. After making the selection, press ENTER

Programming Auto-Dial Numbers

9 Enter the name of the party by pressing the letter entry keys (max. of 20 characters). (Make sure the Rapid Key overlay is flipped down.)

Example: SHARP =			Caps Lock			S	H	/ }	A /	R / $		P / =
01	02	03		04		05	06	07	08	09		10
Q / !	W / "	E / #		R / $ T / % Y / &				U / '	I / (	O / )		P / =
11	12	13		14		15	16	17	18	19		20
SYMBOL	A /		S		D	F	G / {	H / }	J / [	K /	]	L / +
21	22	23		24		25	26	27	28	29		30
Caps Lock	Z / <	X / >			C	V	B	N / *	M / ?	@		.com
31	32	33		34		35		36	37	38		39
SHIFT	/ ^	/	/ \	;	/ :	Space		_	-	. /	,	DEL
• To enter a space, press						Space .
• To change case, press					Caps Lock .
• To clear a mistake, press						DEL .

•To enter a number as part of a name, press the appropriate numeric key. To enter the symbol on a letter key (the character to the right of the slash),

press	SYMBOL	(“SYM” will appear in the display) and then the letter key
(press	SYMBOL	again to turn off symbol entry mode).

•To move the cursor, press or . To switch between letter insertion and letter replacement mode when the cursor is in the middle of a

	sequence of letters, press		MENU	.
10	Press	START/			DESTINATION SET
					CHAIN DIAL
		ENTER .
					1=YES
					2=NO

11 Press or to select “YES” if the number programmed is an

area code or access code to be used for Chain Dialing (see Chain Dialing at the end of this procedure). Select “NO” if the number is a

START/

regular fax number. After making the selection, press ENTER .

Send/Receive	Documents
2.

41