Sharp FODC525, FODC600 Timer Operations, 1 Press, DOCUMENT, then press, overlay if it is down.), . (Flip up the Rapid Key, 2 Make sure that “SET” is selected and

Timer Operations

Timer Operations

The Timer function allows you to store a fax job to be performed automatically at a specified time. Up to 59 timer jobs can be stored at any one time, and the time of each can be specified up to a week in advance.

You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed.

♦The timer function cannot be used for e-mail transmissions.

♦The DOCUMENT key cannot be used for a timer transmission.

Initial procedure

To store a timer job, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific job you want to store (see the following pages).

1 Press	TIMER	. (Flip up the Rapid Key
	X/>

overlay if it is down.)

Display:

TIMER MODE 1=SET 2=CLEAR

2 Make sure that “SET” is selected and			TIMER SET
		START/	1:SEND MODE
	then press		2:BROADCAST MODE
		ENTER .
			3:CONFIDENTIAL TX MODE
			4:POLLING MODE
			5:SERIAL POLLING MODE

3 Press or to select the desired operation and then press

START/

ENTER ).

Note: “CONFIDENTIAL TX MODE” stands for “confidential transmission mode”.

4 Enter a two-digit number for the hour (“01” to “12”) and a two-digit number for the minute (“00” to “59”).

170