Sharp FODC525, FODC600 Setting 06: RECALL TIMES, Setting 07: RECALL INTERVAL, Setting 08: SECURITY SELECTION, Setting 05: TRANSACTION REPORT PRINT SELECTION

Optional Settings

Setting 05: TRANSACTION REPORT PRINT SELECTION

This sets the condition for printing out a Transaction Report. Press or

START/

to select one of the following conditions, and then press ENTER

ERROR/TIMER/	A report will be printed after an error, timer
MEMORY:	operation, or memory operation
SEND ONLY	A report will be printed only after a
	transmission
ALWAYS PRINTS	A report will be printed after each
	transmission, reception, or error
NEVER PRINTS	A report will never be printed.
ERROR ONLY	A report will be printed only after an error
	occurs

♦Initial setting: ERROR ONLY

Setting 06: RECALL TIMES

This sets the maximum number of times your fax will automatically redial if the line is busy. Enter any number from 0 0 to 1 4 .

♦Initial setting: 02

Setting 07: RECALL INTERVAL

This sets the amount of time your fax will wait between automatic redials when the line is busy. Enter 0 1 for 1 minute, 0 2 for 2 minutes, etc., up to a maximum of 15 minutes.

♦Initial setting: 05

Setting 08: SECURITY SELECTION

Select ON to turn polling security on, or OFF to turn it off. Press or

START/

to make the selection and then press ENTER .

♦Initial setting: ON

7. Optional Settings

203