Sharp FODC525, FODC600 press ENTER, asterisks) and then press ENTER, your password (this will appear as, 3 The screen at right will appear. Enter

Using an LDAP Server: Searching for Destinations and User Authorization

2 A list of the sender names stored in personal books that have loginnames will appear. Press or to select your sender name and

START/

press ENTER .

•If your e-mail address is also required for login, the machine will automatically use the sender e-mail address stored in your book (you will not be prompted to enter your e-mail address).

3 The screen at right will appear. Enter	ENTER PASSWORD
	[
your password (this will appear as
START/	]
asterisks) and then press ENTER .

•This completes the login procedure. For Scan to E-mail, the sender name and sender e-mail address stored in your personal book are used.

•If “SERVER ACCESS DENIED. PLEASE CHECK AND RE-ENTER THE INFORMATION.” appears in the display, your login name, e-mail address (if required), or password does not match the corresponding entry in the

LDAP server. Press	START/	to clear the message. Check your personal book
	ENTER

to make sure that your login name (and sender e-mail address if required) are entered correctly (see the following section). Repeat the login procedure, taking care to enter the correct password.

•If an incorrect login name or password is entered three times in a row, “USER LOCK OUT” will appear and it will not be possible to operate the machine for 1 minute.

•If the machine was unable to establish communication with the LDAP server, an error message will appear. Follow the instructions in the message (you may need to check the LDAP settings in the machine’s Web page or consult your network administrator). To clear the message, press

START/

ENTER .

3. Network Scanner

119