Menu operations
Rotate
Menu Operation: A (page 9)
You can set the orientation of the picture.
(Normal): normal image (Mirror): mirror image
ABC |
| ABC |
|
|
|
ABC |
| ABC |
|
| |
|
|
|
(Rotate): rotated image (Upside Down): upside down image
Language
Menu Operation: A (page 9)
You can select a language from the Setup menu. Select from among 16 languages. (Czech, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Polish, Portuguese, Russian, Slovak, Spanish, Swedish, Turkish)
Supply Voltage
Menu Operation: A (page 9)
Switch on or off the power to the antenna connected to the antenna input terminal. (See page 3.)
Option menu
Option
DNR
Input Select
Audio Only
Colour System
DNR (Digital Noise Reduction) TV/DTV/AV only
Menu Operation: A (page 9)
Produce a clearer image. (Off, High, Low)
•This function is available when “TV”, “DTV”, “EXT1”, “EXT2” or “EXT3” is selected in the INPUT SOURCE menu.
Input Select
Menu Operation: A (page 9)
For setting the signal type for EXT 1 only.
The signal type for EXT 2, EXT 3 and EXT 5 is fixed and cannot be changed.
Input source | Signal type |
EXT 1 | Y/C, CVBS, RGB |
NOTE
•If no (colour) image displays, try to change the other signal type.
•If both CVBS and RGB signals are input to EXT 1 using a SCART cable, the TV may output an RGB signal even though you have designated CVBS for the respective terminal. This happens due to the setting of your external equipment.
•The signal type for EXT 2 is automatically selected between an
Audio Only
Menu Operation: A (page 9)
When listening to music from a music programme, you can set the display off and enjoy audio only.
Item
On: Audio is output without screen image.
Off: Both screen images and audio are output.
•“Audio Only” will automatically turn “Off” when an operation other than Volume and Mute is performed.
Colour System
Menu Operation: A (page 9)
You can change the colour system to one that is compatible with the image on the screen. (AUTO, PAL, SECAM, NTSC3.58, NTSC4.43,
NOTE
•If “Auto” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, SECAM).
•This function is only available when “EXT1” or “EXT2” is selected in the INPUT SOURCE menu.
16
