Basic adjustment
Channels with “Skip” set to “On” are passed over
when using Pr/s even if selected while watching
the image from the TV.
When connecting a decoder to the TV, you need to
select “EXT1” or “EXT2”.
NOTE
The factory preset value is “Off”.•
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has
been activated” displays, and the image and sound of the
channel are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the
correct PIN unlocks the “Child Lock” temporarily until the
power is turned off.

Sort

Channel positions can be sorted freely.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
to move, and then press OK.
Press a/b/c/d to move it to the desired
position, and then press OK.
Repeat steps 2 and 3 until all desired channels
are sorted.

Erase Programme

Channels can be erased individually.
Press c/d to select “Yes”, and then press OK.
Press a/b/c/d to select the channel you want
to erase, and then press OK.
A message window pops up.
Press c/d to select “Yes”, and then press
OK to erase the selected channel. All the
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
are erased.
•
•
•
E
1
2
3
4
E
1
2
•
3
4

Programme Setup

Setup

Analogue Setting

You can reconfigure the analogue TV channels settings
automatically or manually.

Additional Search

Use this menu to add new channels automatically after
auto installation has been made.
Start searching channels after selecting the colour system
and sound system.

Manual Adjust

Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press a/b/
c/d to select the channel you want to set and
then press OK.
E
•
E
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a
reference.
Instead of pressing c/d to adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0–9 numeric buttons.
EXAMPLE
179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
•
•
•
•
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
When a TV channel sends its Network Name, the
“Auto Installation” detects the information and assigns
a name to it. However, you can change channel names
individually.
Press a/b/c/d to select each character of the
new name for the channel, and then press OK.
Repeat step 1 above until the name is fully spelt
out.
NOTE
The name can be five characters or less.
If a channel name is less than five characters, select “END”
to set the channel name.
1
2
•
•

Analogue channel settings

27
Fine
Colour sys.
Sound sys. (Broadcasting systems)
Label
Skip
Decoder
Lock