28 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
RDS Radio
- Using the Radio Data System (RDS) -

T o automatically play the desired programme

(EON-PTY)

When the desired type of programme is broadcast, the radio switches to it automati-
cally.
1Tune in to an RDS station (when a station name is displayed).
2Press the EON button when “EON” appears.
“PTY TI” will flash for about 4 seconds.
If the EON button is pressed when “EON” is not displayed, “NO EON” will
appear for 4 seconds to indicate that the unit cannot enter the EON stand-
by mode.
3Whilst they are displayed, select the desired programme type by
pressing the 5/35/3
5/35/3
5/3 or 2/42/4
2/42/4
2/4 button.
The selected programme type will flash.
4Within 4 seconds, press the PTY. TI button.
The selected programme type and “WAITING” will be displayed for 2 sec-
onds each.
“PTY” will appear, and the unit will enter the EON-PTY stand-by mode.
Using the Radio Data System (RDS) (continued)
5When the specified programme starts on an ON (other network)
station, the unit will automatically switch to the station and “PTY”
will flash.
6When the programme is over, the unit will automatically return
to the original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. (“Programme type” “W AIT-
ING”)
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. (“PTY” will go out.)
*MD9000H-E24-30 2001.4.20, 2:11 AM28