Sharp MD-E9000H operation manual Specifications, Amplifier, MiniDisc, Speaker

Specifications MD-E9000H

1

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

■ General

Power source	AC 230 V, 50 Hz
Power consumption	Power on: 50 W
	Power stand-by: 0.6 W (*)
Dimensions	Width: 230 mm (9-1/16")
	Height: 173 mm (6-13/16")
	Depth: 290 mm (11-7/16")
Weight	4.1 kg (9.0 lbs.)

(*) This power consumption value is obtained when the demonstration mode is can- celled in the power stand-by mode. Refer to page 12 to cancel the demonstration mode.

■ Amplifier

Output power	MPO: 66 W (33 W + 33 W) (10 % T. H. D.)
	RMS: 40 W (20 W + 20	W) (10 % T. H. D.)
	RMS: 28 W (14 W + 14	W) (1kHz 0.9 % T. H. D.)
Output terminals	Speakers: 4 ohms
	Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals	Auxiliary: 500 mV/47 kohms

■ CD player

Type	Compact disc player
Signal readout	Non-contact, 3-beam semiconductor laser pickup
D/A converter	1-bit D/A converter
Frequency response	20 - 20,000 Hz
Dynamic range	90 dB (1 kHz)

■ MiniDisc

Type	MiniDisc recorder
Signal readout	Non-contact, 3-beam semiconductor laser pickup
Rotation speed	400 - 900 rpm CLV, Approx.
Error correction	ACIRC (Advanced Cross Interleave Reed-Solomon
	Code)
Quantization	20-bit linear (A/D converter)
Coding	ATRAC/ATRAC 3 (Adaptive TRansform Acoustic Cod-
	ing)
Sampling frequency	44.1 kHz
Recording method	Magnetic modulation overwrite method
Frequency response	20 - 20,000 Hz
D/A converter	1-bit D/A converter
Wow and flutter	Unmeasurable (less than 0.001% W. peak)
Signal/noise ratio	95 dB (1 kHz)
Dynamic range	90 dB (1 kHz)
Audio channel	Stereo: 2 channels (SP, LP2, LP4)

■ Tuner

Frequency range	FM: 87.5 - 108 MHz
	AM: 522 - 1,620 kHz

■ Speaker

Type	2-way type speaker system
	5 cm (2") Tweeter
	10 cm (4") Woofer
Maximum input power	40 W
Rated input power	20 W
Impedance	4 ohms
Dimensions	Width: 140 mm (5-9/16")
	Height: 300 mm (11-13/16")
	Depth: 187 mm (7-3/8")
Weight	1.5 kg (3.3 lbs.)/each

References - Specifications -

2

3

4

5

6

7

8

9

10

11

12

13

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours) 49

*MD9000H-E44-48 49 2001.4.20, 2:16 AM