Simultaneous sleep and timer operation | Sharp MD-E9000H specs

5 Press the MEMORY/ENTER button to set the sleep time.

6 The unit will enter the stand-by mode automatically after the pre- set sleep time has elapsed.

To cancel the sleep operation:

Setting the unit to the power stand-by mode cancels the sleep operation.

You can also cancel the sleep operation by the following steps without setting the unit to the power stand-by mode.

1.Whilst in the sleep operation, press the SLEEP button.

2.Within 10 seconds, press the MEMORY/ENTER button. “SLEEP” indicator will go out.

To confirm the remaining sleep time:

1.Whilst in the sleep operation, press the SLEEP button.

2.Within 10 seconds, press the 5/3 or 2/4 button to select “SLEEP”. The remaining sleep time will be displayed.

●After 10 seconds, the display will return to normal.

●If you press the MEMORY/ENTER button whilst the remaining sleep time is dis- played, you can change the sleep time. (Perform steps 4 and 5 above.)

Notes:

●Once the sleep time is set, it will remain unchanged until a new time is entered.

●The sleep functions cannot be used to control the device connected to this unit. You must use its sleep functions, if it has them.

MD-E9000H

■Simultaneous sleep and timer operation

1 Perform steps 1 - 3 on pages 42 - 43, "Sleep operation".

2 Perform steps 1 - 11 on page 41, "Timer playback/Timer record- ing".

1	Sleep timer setting		FeaturesAdvanced	-OperationSleepandTimer-
2	Timer playback
		Timer playback
	(record) setting	(record) start time

1 minute - 2 hours			Desired time
	Sleep operation will		End time
	automatically stop.

1

2

3

4

5

6

7

8

9

10

11

12

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)	43

*MD9000H-E41-44

43

2001.4.20, 2:15 AM

Image 43

Sharp MD-E9000H operation manual Simultaneous sleep and timer operation, To confirm the remaining sleep time

Contents

MD-E9000H Special Notes Special Notes Contents Volume control PrecautionsGeneral General Information Precautions / Accessories AccessoriesCare of compact discs Front panel Controls and IndicatorsGeneral Information Controls and Indicators 7 8 9 10 11 12 13 16 17 Rear Panel Display Remote Control Controls and Indicators Placing the speaker system Speaker SystemSpeaker connection Tweeter Woofer Bass Reflex Duct Speaker Terminals For Use Connections Connecting the AC power leadSystem Connections Aerial connection Preparation for Use Remote Control Remote ControlBattery installation Test of the remote control To change the display brightness 2 levels Demonstration modeTo turn the power on General Control Equaliser Adjusting the volumeSound Control Bass control Basic Operation Setting the Clock SettingTo check the time when the power is on To interrupt playback Listening to a CDCD Playback Listening to a CD Press the CD 06 button to start playback from track To locate the beginning of a track Listening to a CDTo locate the desired portion MD Playback Listening to a MiniDisc Listening to a MiniDiscPress the MD 06 button to start playback To remove a MiniDisc Listening to a MiniDisc Programmed Play Programmed Play Repeat or Random Play Direct Play Repeat or Random PlayDirect Play Advanced CD/MD Playback Switching the Display Switching the DisplaySwitching the time display Switching the display during MD playback To receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the Radio To clear all memorised stations Listening to a Memorised StationMemorising a station To recall a memorised station Data System RDS Using the Radio Data System RDSUsing Information provided by RDS RDS To stop the Aspm operation before it is complete Using the Radio Data System RDSUsing the Auto Station Programme Memory To erase all of the contents of preset memory To specify programmed types and select stations PTY search To recall stations in memoryIf you select the traffic programme EON-PTY To cancel the EON stand-by mode EON-TI To automatically play the traffic information Meaning About the TP and TA indicators Disc writing TOC Before Recording to a MiniDiscDifferences from tape recordings About track numbers Recording to a MiniDisc from a CD One Touch Editing Recording to a MiniDisc from a CDMD Recording Recording to a MiniDisc from a CD MD Recording To record without using One-Touch EditingLoad a CD and a recordable MiniDisc Press the REC button Recording the first several tracks of a CD Recording to a MiniDisc from a CDProgrammed recording from a CD To interrupt recording Recording to a MiniDisc from the RadioMD Recording Recording to a MiniDisc from the Radio Press the MD 06 button Press the MD button and load a MiniDisc see Titling a MiniDiscCreating disc and track names MD Editing Titling a MiniDisc MiniDiscaTitling MD Editing Editing a Recorded MiniDisc Editing a Recorded MiniDiscTo divide a track To combine tracks To move programmed tracks programmed move To move a track To erase programmed tracks programmed Erase Editing a Recorded MiniDiscTo erase a track To erase all of the tracks at once Timer playback/Timer recording Timer and Sleep OperationAdvanced Features Timer and Sleep Operation Sleep operation Timer and Sleep OperationTo confirm the timer setting To cancel the timer operation To confirm the remaining sleep time Simultaneous sleep and timer operation Recording on a MiniDisc HeadphonesEnhancing Your Stereo System Listening to the playback sounds from Connected device MiniDisc System Limitations What is a MiniDisc?Helpful tip when attaching a label What is a Error Messages Error MessagesWhen an error message is displayed, proceed as follows MiniDisc Tuner Troubleshooting ChartTroubleshooting Chart CD player Troubleshooting Chart Maintenance MiniDisc SpecificationsSpecifications Amplifier Memo Memo Sharp Corporation