Recording to a MiniDisc from the Radio | Sharp MD-E9000H manual

Recording to a MiniDisc from the Radio

1 Tune in to a desired station (see page 22).

2 Load a recordable MiniDisc.

3 Select a recording mode by pressing one of the REC MODE but- tons (SP, LP2, LP4).

● At the same time, you can check the recordable time of the MD.

4 Press the REC button.

● The unit will enter the recording stand-by mode.

5 Press the MD 06 button.

Notes:

● Before recording an AM broadcast, enter the recording stand-by mode, and then separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast can be tuned in most clearly.

● During recording, you cannot change stations.

To interrupt recording:

Press the MD 06 button.

To resume recording, press the MD 06 button again.

To stop recording:

Press the MD ■ button.

The recording will stop and the track number will be written on the MiniDisc.

To record the track number whilst recording:

The recording is performed as a single track.

To identify different sections of a recording, you can increase the track number at any point during the recording process by pressing the REC button.

● The track number will increase by one, and then the recording will continue.

MD-E9000H

MD Recording - Recording to a MiniDisc from the Radio -

1

2

3

4

5

6

7

8

9

10

11

12

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)	35

*MD9000H-E31-35

35

2001.4.20, 2:13 AM

Image 35

Sharp MD-E9000H MD Recording Recording to a MiniDisc from the Radio, Press the MD 06 button, To interrupt recording

Contents

MD-E9000H Special Notes Special Notes Contents General PrecautionsVolume control Care of compact discs AccessoriesGeneral Information Precautions / Accessories Front panel Controls and IndicatorsGeneral Information Controls and Indicators 7 8 9 10 11 12 13 16 17 Rear Panel Display Remote Control Controls and Indicators Placing the speaker system Speaker SystemSpeaker connection Tweeter Woofer Bass Reflex Duct Speaker Terminals For Use Connections Connecting the AC power leadSystem Connections Aerial connection Preparation for Use Remote Control Remote ControlBattery installation Test of the remote control To change the display brightness 2 levels Demonstration modeTo turn the power on General Control Equaliser Adjusting the volumeSound Control Bass control To check the time when the power is on SettingBasic Operation Setting the Clock To interrupt playback Listening to a CDCD Playback Listening to a CD Press the CD 06 button to start playback from track To locate the desired portion Listening to a CDTo locate the beginning of a track Press the MD 06 button to start playback Listening to a MiniDiscMD Playback Listening to a MiniDisc To remove a MiniDisc Listening to a MiniDisc Programmed Play Programmed Play Direct Play Direct Play Repeat or Random PlayRepeat or Random Play Advanced CD/MD Playback Switching the Display Switching the DisplaySwitching the time display Switching the display during MD playback To receive an FM stereo transmission Auto tuningListening to the Radio Radio Listening to the Radio To clear all memorised stations Listening to a Memorised StationMemorising a station To recall a memorised station Data System RDS Using the Radio Data System RDSUsing Information provided by RDS RDS To stop the Aspm operation before it is complete Using the Radio Data System RDSUsing the Auto Station Programme Memory To erase all of the contents of preset memory If you select the traffic programme To recall stations in memoryTo specify programmed types and select stations PTY search EON-PTY To cancel the EON stand-by mode EON-TI To automatically play the traffic information Meaning About the TP and TA indicators Disc writing TOC Before Recording to a MiniDiscDifferences from tape recordings About track numbers MD Recording Recording to a MiniDisc from a CD Recording to a MiniDisc from a CDRecording to a MiniDisc from a CD One Touch Editing Load a CD and a recordable MiniDisc Press the REC button To record without using One-Touch EditingMD Recording Programmed recording from a CD Recording to a MiniDisc from a CDRecording the first several tracks of a CD To interrupt recording Recording to a MiniDisc from the RadioMD Recording Recording to a MiniDisc from the Radio Press the MD 06 button Press the MD button and load a MiniDisc see Titling a MiniDiscCreating disc and track names MD Editing Titling a MiniDisc MiniDiscaTitling MD Editing Editing a Recorded MiniDisc Editing a Recorded MiniDiscTo divide a track To combine tracks To move programmed tracks programmed move To move a track To erase programmed tracks programmed Erase Editing a Recorded MiniDiscTo erase a track To erase all of the tracks at once Advanced Features Timer and Sleep Operation Timer and Sleep OperationTimer playback/Timer recording Sleep operation Timer and Sleep OperationTo confirm the timer setting To cancel the timer operation To confirm the remaining sleep time Simultaneous sleep and timer operation Recording on a MiniDisc HeadphonesEnhancing Your Stereo System Listening to the playback sounds from Connected device MiniDisc System Limitations What is a MiniDisc?Helpful tip when attaching a label What is a When an error message is displayed, proceed as follows Error MessagesError Messages MiniDisc Tuner Troubleshooting ChartTroubleshooting Chart CD player Troubleshooting Chart Maintenance MiniDisc SpecificationsSpecifications Amplifier Memo Memo Sharp Corporation