Timer and Sleep Operation, Sleep operation | Sharp MD-E9000H

Timer and Sleep Operation (continued)

Advanced Features - Timer and Sleep Operation -

Notes:

IThe timer cannot control the component connected to the auxiliary input sockets.

IWhen the CD or MiniDisc is over, playback will stop before the stop time.

If you wish to play to the stop time, set repeat play for the CD or MiniDisc.

●Timer playback and timer recording cannot be set at the same time.

To confirm the timer setting:

1.Whilst in the timer stand-by mode, press the TIMER button.

2.Within 10 seconds, press the 5/3 or 2/4 button to select “TIMER CALL”.

3.Press the MEMORY/ENTER button.

After the settings are displayed sequentially, your system will return to the timer stand- by mode.

To cancel the timer operation:

Whilst in the timer stand-by mode, press the ON/STAND-BY button to turn the power on. The timer operation will be cancelled.

You can also cancel the timer operation by the following steps without turning on the power.

1.Press the TIMER button.

2.Within 10 seconds, press the 5/3 or 2/4 button to select “CANCEL”.

3.Press the MEMORY/ENTER button.

Caution:

In the following cases, the timer recording function will not work.

●When a MiniDisc has not been inserted.

●When the MiniDisc is for playback only or protected against accidental erasure.

●When there is no recording space left on the MiniDisc ("TOC FULL " or "DISC FULL" appears).

■Sleep operation

The radio, CD and MiniDisc can all be turned off automatically.

1 Play the desired sound source.

2 Press the SLEEP button.

3 Within 10 seconds, press the MEMORY/ENTER button.

4 Press the 5/3 or 2/4 button to select the time. (Maximum: 2 hours - Minimum: 1 minute)

The amount of sleep time can also be changed during the sleep operation.

42	Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

*MD9000H-E41-44

42

2001.4.20, 2:15 AM

Image 42

Sharp MD-E9000H Timer and Sleep Operation, Sleep operation, To confirm the timer setting, To cancel the timer operation

Contents

MD-E9000H Special Notes Special Notes Contents Precautions Volume controlGeneral Accessories General Information Precautions / AccessoriesCare of compact discs 7 8 9 10 11 12 13 16 17 Controls and IndicatorsGeneral Information Controls and Indicators Front panel Display Rear Panel Controls and Indicators Remote Control Tweeter Woofer Bass Reflex Duct Speaker Terminals Speaker SystemSpeaker connection Placing the speaker system Aerial connection Connecting the AC power leadSystem Connections For Use Connections Test of the remote control Remote ControlBattery installation Preparation for Use Remote Control General Control Demonstration modeTo turn the power on To change the display brightness 2 levels Bass control Adjusting the volumeSound Control Equaliser Setting Basic Operation Setting the ClockTo check the time when the power is on Press the CD 06 button to start playback from track Listening to a CDCD Playback Listening to a CD To interrupt playback Listening to a CD To locate the beginning of a trackTo locate the desired portion Listening to a MiniDisc MD Playback Listening to a MiniDiscPress the MD 06 button to start playback Listening to a MiniDisc To remove a MiniDisc Programmed Play Programmed Play Direct Play Repeat or Random Play Repeat or Random PlayDirect Play Switching the display during MD playback Switching the DisplaySwitching the time display Advanced CD/MD Playback Switching the Display Radio Listening to the Radio Auto tuningListening to the Radio To receive an FM stereo transmission To recall a memorised station Listening to a Memorised StationMemorising a station To clear all memorised stations Information provided by RDS Using the Radio Data System RDSUsing Data System RDS RDS To erase all of the contents of preset memory Using the Radio Data System RDSUsing the Auto Station Programme Memory To stop the Aspm operation before it is complete To recall stations in memory To specify programmed types and select stations PTY searchIf you select the traffic programme To cancel the EON stand-by mode EON-PTY To automatically play the traffic information EON-TI About the TP and TA indicators Meaning About track numbers Before Recording to a MiniDiscDifferences from tape recordings Disc writing TOC Recording to a MiniDisc from a CD Recording to a MiniDisc from a CD One Touch EditingMD Recording Recording to a MiniDisc from a CD To record without using One-Touch Editing MD RecordingLoad a CD and a recordable MiniDisc Press the REC button Recording to a MiniDisc from a CD Recording the first several tracks of a CDProgrammed recording from a CD Press the MD 06 button Recording to a MiniDisc from the RadioMD Recording Recording to a MiniDisc from the Radio To interrupt recording MD Editing Titling a MiniDisc Titling a MiniDiscCreating disc and track names Press the MD button and load a MiniDisc see MiniDiscaTitling To combine tracks Editing a Recorded MiniDiscTo divide a track MD Editing Editing a Recorded MiniDisc To move a track To move programmed tracks programmed move To erase all of the tracks at once Editing a Recorded MiniDiscTo erase a track To erase programmed tracks programmed Erase Timer and Sleep Operation Timer playback/Timer recordingAdvanced Features Timer and Sleep Operation To cancel the timer operation Timer and Sleep OperationTo confirm the timer setting Sleep operation Simultaneous sleep and timer operation To confirm the remaining sleep time Listening to the playback sounds from Connected device HeadphonesEnhancing Your Stereo System Recording on a MiniDisc What is a What is a MiniDisc?Helpful tip when attaching a label MiniDisc System Limitations Error Messages Error MessagesWhen an error message is displayed, proceed as follows CD player Troubleshooting ChartTroubleshooting Chart MiniDisc Tuner Maintenance Troubleshooting Chart Amplifier SpecificationsSpecifications MiniDisc Memo Memo Sharp Corporation