Sharp VL-WD255U Adjusting the Hand Strap Using the Lens Cap, Open the hand strap flap 1

Preparation

Adjusting the Hand Strap	Using the Lens Cap
1 Open the hand strap flap (1) and the	Attach the strap of the lens cap to the hand
grip strap (2).	strap as shown below.

Preparation

2 Loosen the grip strap, pass your right hand through the loop, and put your thumb on the REC START/STOP button. Then, pull the grip strap tight until it fits snugly.

REC START/STOP button

3 Seal the velcro fasteners of the grip strap and the hand strap flap.

Caution:

•Do not swing the camcorder by the hand strap.

When attaching or

removing the lens cap, Tabs press both tabs on the

top and bottom of the cap.

Hook

When recording, hang the hook of the lens cap on the hand strap so that the cap will not get in the way.

Note:

• Always replace the lens cap on the lens when the camcorder is not in use.

17