Sharp VL-WD255U operation manual Gain-up, To cancel the gain-up function

Gain-up

When you are recording in a dark or poorly- illuminated location, “LIGHT” is displayed on the screen. Use the gain-up function to record a brighter picture.

Note:

•At locations where lighting is adequate, “LIGHT” will not appear. The gain-up function cannot be used in this case.

GAMMA/BRIGHTER button

To obtain a brighter picture

Press the GAMMA/BRIGHTER button again.

•The ` indicator appears.

GAMMA

AUT O

In TAPE-CAMERA or CARD-CAMERA mode, press the GAMMA/BRIGHTER button once.

•“GAMMA” appears, indicating that the gain-up function is now working.

L I GH T

AUT O

To cancel the gain-up function

Press the GAMMA/BRIGHTER button until “GAMMA” disappears.

Notes:

•Some picture noise appears in Gain-up mode. The picture noise increases when the ` indicator is displayed.

•When the ` indicator is displayed, a residual image may appear behind a subject that exhibits a lot of movement.

•Fine brightness adjustment is possible using the manual exposure function (see page 51).

Useful Features

GAMMA	L I GH T
AUT O

34