Inserting a Mini DV Cassette

Inserting a SmartMedia Card

1 Attach the power source to the

1

Make sure that the power switch is set to

camcorder, then slide the cassette

 

OFF.

compartment door release and open the

2

 

cassette compartment door.

Open the LCD monitor.

Card slot cover

3 Open the card slot cover in the direction of arrow.

2 Insert the cassette fully with the window facing outwards, and with the erasure protect tab facing upwards.

SAVE

C E R

3 Press the W mark gently until the cassette holder clicks into place. Close the compartment door by pressing the center until it clicks into place.

W mark

4 Insert a SmartMedia card into the slot as shown below, and push it in as far as it will go.

Chipped corner

Contact area

5 Close the card slot cover.

vi

Page 7
Image 7
Sharp VL-WD255U operation manual Inserting a Mini DV Cassette Inserting a SmartMedia Card, Close the card slot cover