Sharp VL-WD255U operation manual Remo T E on, Operating the Remote Control, VOL. +/L buttons p

3 Press d or y to select “ON”, then press e.

REMO T E ON

4 Press the MENU/DISPLAY button to turn off the menu screen.

Operating the Remote Control

1 Open the LCD monitor completely (1), then rotate it 180° vertically (2).

180

90

2 Set the Media Selection switch on the camcorder to TAPE or CARD.

3 Set the Power switch on the camcorder to CAMERA or VCR.

4 Aim the remote control at the remote sensor of the camcorder, and press the control buttons for operation.

Remote sensor
16	ft
	m)
(5

Approximate operating range of remote control

REW button [pp. 23, 78]

CARD REC button [p. 74]

TAPE REC START/STOP button [p. 20]

ZOOM W/T buttons [pp. 21, 60]

VOL. +/L buttons [p. 23]

PLAY button

[pp. 23, 78]

FF button [pp. 23, 78]

STOP button [pp. 23, 78]

SLOW button [p. 45]

Shift buttons [p. 60]

Advance/reverse buttons [p. 45]

PAUSE/STILL button [pp. 25, 45]

Notes:

•Be careful not to allow direct sunlight or bright light from interior illumination to fall onto the remote sensor, as this may prevent the remote control from operating properly.

•Be sure that there are no obstacles between the remote control and the remote sensor.

•When the batteries are depleted and the remote control does not operate, replace them with new AA (R6 or UM/SUM-3) batteries.

Useful Features

44