Sharp VL-WD255U Easy Camera Recording on Tape, Tape Playback, Zooming, Quick Operation Guide

Quick Operation Guide

Easy Camera Recording on Tape

1 Make sure that a cassette is inserted.

2 Remove the lens cap, and lift up the viewfinder.

3 Set the Media Selection switch to TAPE.

4 Hold down the Lock button and set the Power switch to

CAMERA.

Lock button

5 Press the REC START/STOP button to begin recording.

RE C

Tape Playback

1 Press the LCD monitor OPEN release button (1), and open the LCD monitor to a 90° angle to the camcorder body (2).

LCD monitor OPEN release button

90

2 Adjust the LCD monitor to an angle that allows easy viewing on the on-screen picture.

3 Set the Media Selection switch to TAPE.

4 Hold down the Lock button and set the Power switch to VCR.

Lock button

Zooming

Push the Power Zoom control to T (1) (telephoto) or W (2) (wide angle) side.

Power Zoom control

5 Press e (or r) on the Operation button to rewind (or fast forward) the tape to the desired point.

AUDIO1+2

6 Press y to begin playback.

AUDIO1+2

To stop playback

Press d.

vii