Sharp VL-WD255U operation manual Letting the Subject Monitor, Shot, Set the Power switch to Camera

Letting the Subject Monitor	2 Set the Power switch to CAMERA.
the Shot	• The subject is displayed in the
	viewfinder, and a mirror image of the
Open the LCD monitor and rotate it 180°	subject is displayed on the LCD monitor.
vertically so that the screen faces the other way
and the subject can monitor the shot while you
are recording with the viewfinder.
If the camcorder is steadied, you can record
yourself in the scene by watching yourself on
the LCD monitor. The supplied remote control is
useful for such occasions.

3 Set the Media Selection switch to TAPE or CARD, and begin recording.

Caution:

• Do not invert the image by rotating the monitor during recording.

Notes:

• The screen image is automatically inverted when the vertical rotation of the monitor is between

135° and 180°. When the monitor is rotated back to within 135°, the image returns to normal.

• If the F indicator flashes when the monitor is in the inverted position, this indicates a warning. To check the type of warning, rotate the monitor back to within 135°. (See pages 7 and 8 for descriptions of the warning indicators.)

1 Open the LCD monitor to a 90° angle to the camcorder body (1), and then rotate it 180° vertically (2).

180

90

Useful Features

42