9.Registration type programming (Press sto skip. / Press Ato terminate.)
(1)Go to (2) when the registration type does not need to be changed from "NORMAL". Otherwise, press
:key to display "SICS".
Each time :key is pressed, the display shows "SICS" and "NORMAL" alternately.
Choose "SICS" for single item cash sale and "NORMAL" for normal sale.
Default setting is "NORMAL".
If an entry of a department programmed for SICS is made first, the sale will be finalized as a cash sale as soon as the department key is pressed. If the entry is made after entering a department not programmed for SICS, the sale will not be finalized until the Akey is pressed.
(2) Press the skey to register the setting. | s |
On the upper line of the display, guidance message |
|
for the next step will be displayed. |
|
On the lower line of the display, the current setting |
|
will be displayed. |
|
GROUP NO.
0601
10.Group No. programming (Press sto skip. / Press Ato terminate.)
(1) Enter a group no. for the department using numeric | 1 |
keys.
Choose a group from groups 1 to 9 for normal positive department, group 10 for negative normal department, group 11 for positive hash department, and group 12 for negative hash department. Default setting is group 1 for dept. code 1 to 20 and 22 to 99, and group 10 for dept. code 21.
GROUP NO.
061
(2)Press the skey to register the setting.
On the upper line of the display, guidance message for the next step will be displayed.
On the lower line of the display, the current setting will be displayed.
s
LIMIT DIGITS
068
11.Entry digit limit programming (Press sto skip. / Press Ato terminate.)
(1) Enter entry digit limit using numeric key. | 7 |
The entry digit limit can be set up to 8.
Default setting is 8.
LIMIT DIGITS
067
20
