7
PLU (Price Look-Up) and Subdepartment Programming
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered. The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. A maximum of 1800 PLU/subdepartment settings are possible. Each one belongs to a department and acquires the department’s parameters (tax status, SICS and entry digit limit).
The cash register is preprogrammed so all 1800 codes are assigned as positive PLUs associated with department 1 and preset unit price “0”.
• To keep current setting on each programming, press the skey when the corresponding guidance message is firstly displayed.
•When pressing the Akey in the middle of procedure, the programming will terminate and the data you entered before the press of Ais saved.
•When pressing the lkey twice in the middle of procedure, the programming will terminate and the data you entered before pressing the lkey twice is NOT saved.
•When pressing the department,
programming.
Key operation | Operator display |
1. Specify the PLU code.
(1) Enter PLU code using numeric key, and then press | 71 p |
the pkey.
On the upper line of the display, immediately after displaying the current text data, guidance message for the next step will be displayed.
On the lower line of the display, the corresponding PLU code you entered will be displayed.
PLU.0071
0071 0.00
ENTER[00]KEY
0071 0.00
2.Text programming (Press sto skip. / Press Ato terminate.)
(1) Press :key to enter text programming. | : | |
On the upper line of the display, immediately after |
| |
displaying guidance message, the current text data |
| |
will be displayed. |
| |
On the lower line of the display, the character code |
| |
corresponding to the first character of the text data |
| |
will be displayed. |
| |
(2) Enter an item name. | MELON SSS | |
A maximum of 16 characters can be entered. | ||
| ||
Please refer to “Guidance for text programming” on |
| |
page 13 for entering the item name. |
| |
When you start entering a character, the current |
| |
text data will be overwritten by new data. |
| |
Use the Sand Bkeys to delete unnecessary |
| |
text data. |
| |
Pressing the Pand @key moves the cursor to |
| |
the right and left respectively. |
|
22
ENTER TEXT
0071 0.00
PLU.0071
0071 080
MELON | _ |
0071 | 032 |
