60
Item: Selection: Print:
AOpen rate entry Enable* 0
Disable 1
BPreset rate entry Enable* 0
Disable 1
CTAB (position of decimal point from right) 0-3 (default:2)
Programming for r,R,X,Y,cand b
The Xkey is used as an example below.
Programming for rand R, the step 3 and 4 are skipped.
1. Specify the key to program.
2. Text programming (Press sto skip. / Press Ato terminate.)
CHEQUE_
33 032
CHEQUE
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Use the Sand Bkeys to delete unnecessary
text data.
Pressing the Pand @key moves the cursor to
the right and left respectively.
ENTER TEXT
33 0.00
CHECK1
33 067
:
(1) Press :key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
CH1 PROGRAMMING
33 0.00
ENTER[00]KEY
33 0.00
(1) Press the Xkey to enter Xprogramming.
On the upper line of the display, immediately after
displaying "CH1 PROGRAMMING", guidance
message for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
Operator displayKey operation
From left, ABC
Rate
Text
Print
A303_3(En) 06.7.22 4:41 PM Page 60