59
Part3 FOR THE MANAGER
Part2Part1
4. Open rate entry programming (Press sto skip. / Press Ato terminate.)
5. Preset rate entry programming (Press sto skip. / Press Ato terminate.)
6. Position of decimal point programming (Press sto skip. / Press Ato terminate.)
7. Terminate programming
PGM
0.00
A
(1) Press the Akey to terminate the Vkey
programming.
ENTER[TL/NS]KEY
0.00
s
(2) Press the skey to register the setting.
TAB
37 2
2
(1) Enter the position of decimal point from right using
numeric key.
The position of decimal point from right can be set
from 0 to 3.
Default setting is 2.
TAB
37 2
s
(2) Press the skey to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the preset rate entry does not need
to be changed from "PRESET ENABLE".
Otherwise, press :key to display "PRESEST
DISABLE".
Each time :key is pressed, the display shows "PRESET
DISABLE" and "PRESET ENABLE" alternately.
Default setting is "ENABLE".
PRESET RATE
37 PRESET ENABLE
mms
(2) Press the skey to register the setting.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the open rate entry does not need to
be changed from "OPEN ENABLE". Otherwise,
press :key to display "OPEN DISABLE".
Each time :key is pressed, the display shows
"OPEN DISABLE" and "OPEN ENABLE" alternately.
Default setting is "ENABLE".
A303_3(En) 06.7.22 4:41 PM Page 59