Sharp XE-A506 instruction manual Programming date, time and tax, Date Time Tax

3.Insert the end of the paper roll into the paper chute until it is caught by

the printer auto-feed and comes out of the top of the printer. If the printer does not catch the paper, feed the paper while pressing the { key.

4.Cut off excess paper with the paper cutter.

5. Set a paper roll in the paper roll cradle of the journal side.

6.Insert the end of the paper into the paper chute of the printer until it is caught by the printer auto-feed and

comes out of the top of the printer. If the printer does not catch the paper, feed the paper while pressing the }key.

7.Insert the end of the paper into the slit in the take-up spool and fold the paper to front side. (Press the }key to feed more paper if required.)

8.Wind the paper two or three turns around the spool shaft.

9.Set the spool on the bearing, and press the }key to take up excess slack in the paper.

10.Replace the printer cover.

Slit

6 Programming date, time and tax

The cash register provides text languages of English and Spanish. It is preset to English. If you want to change the language, you must change it before programming. Refer to “Language selection” in “Various Function Selection Programming 2” section for changing the language.

Before you can proceed with registration of sales, you must program:

•date

•time

•tax

Please refer to the BASIC FUNCTION PROGRAMMING section for details (page 31).

7 Programming other necessary items

While the cash register is pre-programmed to be used with minimal setup, it does provide you with optional functions. Before you start programming, please read through the sales operations section to understand optional functions. The main optional functions are listed below:

•PLU (price lookup)/sub-department

•UPC/EAN

•Consecutive number

•Machine number

•Power save mode (factory setting: goes into power save mode after 30 minutes)

10