Time
For setting the time, enter the time in 4 digits (“hhmm” format) using the
Time(max. 4 digits in 
s
Key operation example |
1430 s
Time
For display and
2Tax Programming for Automatic Tax Calculation Function
Before you can proceed with ringing sales transactions, you must first program the tax that is levied in accordance with the laws of your state. The cash register comes with the ability to program four different tax rates. In most states, you will only need to program Tax 1. However if you live in an area that has a separate local tax (such as a Parish tax) or a hospitality tax, the register can be programmed to calculate these separate taxes.
When you program the tax status for a department, tax will automatically be added to sales of items assigned to the department according to the programmed tax status for the department. You can also enter tax manually.
There are two tax programming methods. The tax rate method uses a straight percentage rate per dollar. The tax table method requires tax break information from your state or local tax offices. Use the method which is acceptable in your state. You can obtain necessary data for tax programming from your local tax office.
Tax programming using a tax rate
The percent rate specified here is used for tax calculation on taxable subtotals.
s
9
@
*Tax number (1 to 4) 
@
| When the minimum taxable amount is zero |
| |
Tax rate | @ | Minimum taxable amount | s A |
(0.0000 to 100.0000) | (0.01 to 999.99) | ||
To delete a tax rate, use the following sequence:
s
9
@
*Tax number (1 to 4) 
@
v
A
32
