Useful Features
-47
5 Selecting the Transmission
Speed (RS-232C)
6 Fan Mode Setting
Setting the Input Terminal Names (Input
Name)
Set the name of the input terminal (up to 14 alphanu-
merical characters).
1 Press P/R to select “Input Name”
and then press ENTER.
Picture
Input name
H D M I 1
HDMI1
Reset
Return
SIG-ADJ SCR-ADJ PRJ-ADJ
\ or | button Selects a character column.
▼ or 、 button Selects a character.
ENTER button
Sets the input terminal name.
2 Press P/R to select “Return” and
then press ENTER to return to the
previous screen.
To return to the previous setting, select
“Reset” and then press ENTER.
Note
•
When connecting the projector to a Sharp Video
Product with an HDMI cable using an input
mode of HDMI1 or HDMI2 and the linked func-
tion with HDMI CEC (“One Touch Play” or “Sys-
tem Standby”) works normally, the name of the
connected Sharp Video Product is automatically
captured.
•
When the input terminal name has been changed
by a user, the changed name is displayed.
•
To return to the default name, select “Reset”
and press ENTER.
4
Setting the Demo Mode
Set the Demo Mode to “On” or “Off”.
Selectable items Description
On This enables Demo Mode.
Off This disables Demo Mode.
•
1
2
7
Returning to the Default Settings
8
Lamp Timer (Life)
You can confi rm the cumulative lamp usage time and the
remaining lamp life (percentage).
Lamp usage condition Remaining lamp life
“Life” 100% 5%
Operated exclusively with
“Eco+Quiet” set to “On”
Approx. 3,000
hours
Approx. 150
hours
Operated exclusively with
“Eco+Quiet” set to “Off”
Approx. 2,000
hours
Approx. 100
hours
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the us-
age condition.
Make sure that both the projector and computer are set
for the same baud rate.
Selectable items Description
9600bps
38400bps
115200bps
Transmission speed is slow.
Transmission speed is rapid.
This function changes the fan rotation speed.
Selectable items Description
Normal Suitable for normal environments.
High Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
• When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.
Use “All Reset” to initialize all the adjustments you have
made to the default settings.
Note
The following items cannot be initialized.
• “SIG-ADJ” menu — Resolution
• “SCR-ADJ” menu — Language
• “PRJ-ADJ” menu — Lamp Timer (Life)
Menu operation ⇒ Page 35