Image Projection
Adjusting the Projected Image
1 Adjusting the Focus
You can adjust the focus with the focus ring on the projector.
Rotate the focus ring to adjust the focus while watching the projected image.
2 Adjusting the Picture Size
You can adjust the picture size using the zoom ring on the projector.
Rotate the zoom ring to enlarge or shrink the picture size.
3 Adjusting the Height
The height of the projector can be adjusted using the adjustment feet.
When the screen is above the projector, the projection image can be made higher by adjusting the projector.
1
Lift the projector to adjust its height while lifting the HEIGHT 
ADJUST lever.
2
Remove your hands from the HEIGHT ADJUST lever of the projector after its height has been finely adjusted.
• The angle of projection is adjustable up to 9 degrees from the surface on which the projector is placed.
Note
•When adjusting the height of the projector, trapezoidal distortion occurs. Follow the procedures in Keystone Correction to correct the distortion. (See pages 25 and 44.)
Zoom ring
Focus ring
HEIGHT ADJUST lever
Make small 
adjustments.
Info
•Do not apply too much pressure on the projector when the front adjustment feet come out.
•When lowering the projector, be careful not to get your fingers caught in the area between the adjust- ment feet and the projector.
•Hold the projector firmly while lifting or carrying.
•Do not hold by the lens area.
-24
