Other connected equipment
When connecting a computer or other
Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections.
Using the projector in other countries
The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in. When using the projector overseas, make sure you use an appropriate power cord for the country you are in.
Temperature monitor function
If the temperature inside the projector increases, due to blockage of the air vents, or the setting location, the temperature warning indicator will blink. And if the
temperature keeps on rising, “
” will illuminate in the lower left corner of the picture with the temperature warning indicator blinking. If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter standby mode. Refer to “Maintenance Indicators” on pages 60 and 61 for details.
Info
•The cooling fan regulates the internal temperature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunction.
Observe the following safeguards when using the 3D Glasses.
Prevention of accidental ingestion
Keep the batteries and band accessory out of the reach of small children. Small children can accidentally swallow these parts.
–If a child accidentally swallows any of these parts, seek immediate medical attention.
Do not disassemble
Do not disassemble or modify the 3D Glasses.
Using the 3D Glasses
Parents/guardians should monitor children’s view- ing habits to avoid their prolonged use without rest periods.
Use only the 3D Glasses recommended for this product.
Use the 3D Glasses only for the specified purpose.
Do not move around while wearing the 3D Glasses. The surrounding area appears dark, which may result in falling or other accidents that may cause injury.
Caution for lithium battery
Batteries must not be exposed to excessive heat such as direct sunlight or fire.
Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.
Take care not to reverse the battery poles (+ and
Handling the 3D Glasses
Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may damage the glass section, which may result in injury.
Be careful not to trap your finger in the hinge section of the 3D Glasses. Doing so may result in injury.
–Pay special attention when children are using this product.
Caring for the 3D Glasses
Use only the cloth provided with the 3D Glasses to clean the lenses. Remove dust and soil from the cloth. Any dust or other soiling on the cloth may result in scratches on the product. Do not use solvents such as benzene or thinners as doing so may cause the coating to peel off.
When cleaning the 3D Glasses, take care not to allow water or other fl uids to come into contact with the glasses.
Always store the 3D Glasses in the case provided when not in use.
When storing the 3D Glasses, avoid very humid or hot locations.
Viewing 3D images
If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.
Do not use the 3D Glasses if they are cracked or bro- ken.
-8
