-50

Supplied Accessories for 3D Glasses

Make sure the following accessories are provided with the 3D Glasses. Two sets of 3D Glasses are provided.
Nose pad *
(Large ×2, small ×2)
Page 52
Cleaning cloth
(×2)
Glasses case
(×2)
3D Glasses band *
(×2)
Page 52
* Use the 3D Glasses band and nose pad as needed.
Precision screwdriver
(Phillips ×2, slotted ×2)
Page 51
3D Glasses
(×2)
Pages 51 to 54
Note
Please contact your local authority for the correct method of disposal of this product and/or packaging.
1 2
4
5
3
6
1 Power button
Press for at least 2 seconds to turn on and off the
3D Glasses.
When the 3D Glasses are turned on, pressing this
button switches between 2D and 3D modes. (See
page 52.)
2 LED light
Blinks 3 times when the power is turned on.
Blinks 2 times when 2D mode is selected.
Blinks 3 times when 3D mode is selected.
Blinks 6 times when the battery power is low.
Lights for 2 seconds when the power is turned off.
3 Service terminal
This terminal is for service use only.
Please do not connect any other device to this terminal.
4 Infrared receiver
An infrared signal sent from the projector is refl ected onto
the screen. The refl ected infrared signal is then received
by the infrared receiver. The 3D Glasses turn off
automatically after 3 minutes if no signal is received.
5 Nose pad mount 52
The dedicated nose pad can be mounted here.
6 3D Glasses band mount 52
The dedicated 3D Glasses band can be mounted here.
Note
Do not soil or apply stickers or other obstacles to the infrared receiver. Doing so may block signals from
the screen and prevent the 3D Glasses from working correctly.
Interference from other infrared communications equipment may prevent you from viewing 3D images
correctly.
Enjoying 3D Image Viewing (Continued)

Part Names