Before Using the 3D Glasses
Before using the 3D Glasses for the first time, remove the insulating sheet attached to them.
Replacing the Button Cell Battery
The battery has an expected service life of ap- proximately 75 hours.
•When the battery power is low, the LED light blinks six times after the power is turned on.
•When replacing the button cell, use only the designated battery type (Maxell branded CR2032 lithium button battery).
1
Loosen the screw used to secure the battery cover, and then remove the battery cover.
1
2
2
Remove the button cell battery.
1Place the tip of the slotted precision screw- driver into the opening between the button cell and the socket.
2Lift up the button cell while taking care not to get the screwdriver caught on the metal latch.
1 
2
3
When the battery comes loose from the socket, pick it out with your fingers.
4
Hook a new button cell to the metal latch and insert it into the socket.
•Take care not to reverse the battery polarity (+ and
5 | Close the battery cover. |
6 | Insert the screw to secure the bat- |
| UsefulFeatures |
| tery cover. |
Note
•Used batteries should be disposed in accor- dance with local laws and regulations.
