Disconnect the power to the telephone base | Sharper Image 6031

Troubleshooting

Problem	Suggestion
My cordless handset	• Make sure the power cord is securely plugged into the telephone base. Plug the unit into a
beeps and is not	different working electrical outlet not controlled by a wall switch.
performing normally.	• Move the cordless handset closer to the telephone base. It may be out of range.
	• Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and
	plug it back in again. Allow up to one minute for the cordless handset and the telephone base
	to synchronize.
	• Other electronic products can cause interference to your cordless telephone. Try installing
	your telephone as far away from these electronic devices as possible: wireless routers, radios,
	radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal
	computers, kitchen appliances and other cordless telephones.

Common cure for	• If the unit is not responding normally, try putting the cordless handset in the telephone base.
electronic equipment	If it does not seem to respond, try the following (in the order listed):
	• Disconnect the power to the telephone base.
	• Disconnect the battery on the cordless handset.
	• Wait a few minutes before connecting power to the telephone base.
	• Re-install the battery and place the cordless handset into the telephone base.
	• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up
	to one minute for this to take place.

38	www.vtechphones.com

Image 41

Sharper Image 6031 Disconnect the power to the telephone base, Disconnect the battery on the cordless handset

Contents

Congratulations Table of contents Table of contents Parts checklist Installation Install handset battery 800 Telephone base installation Dial type Desk/table bracket installation If you subscribe to DSL service Handset layout Telephone settings Telephone base layout Telephone settingsBasic operation Ring melody Date and time Battery low tone Ring volume Key tone Out of range toneKey tone is on To reach Key beeps. Press MENU/SELECT Press MENU/SELECT Edit handset nameLanguage Press or to reach Clr VoiceMail. Press MENU/SELECT Clear voicemail Select Reset to default settings Make, answer and end calls Basic operationOptions while on calls Speakerphone Mute Find handset Directory Advanced operationReview the directory Search the directory Character chart Dial a directory entry Store a directory entry Delete from the directory Edit an entry in the directoryTo delete an entry Key Tone is on To delete all entries About caller ID Review the call log Call log Store a call log number Dial a call log number To delete one entry Delete from the call log Store a redial number to the directory RedialReview redial Delete from redial Dial from redial Handset light Handset and telephone base indicatorsTelephone base lights Handset icons Display When Handset display screen messages Call log display screen messages Check Battery Battery Important safety instructions Low Battery is Troubleshooting 40 for further instruction Charge light is off in this section irst, try all the above suggest ions Base Make sure the ringer is on Less background noise There is noise Make sure the telephone line cord is plugged in securely Hear other calls when Disconnect the battery on the cordless handset Disconnect the power to the telephone base Operating range Maintenance About cordless telephones Warranty How do you get warranty service? FCC Part FCC, Acta and IC regulations Industry Canada Rbrc seal Technical specifications Index Search the directory 91-001079-010-100 User’s manual