Checking Coolant / Water, Engine Oil Capacity | Shindaiwa DG250MI

Viscosity and temperature

○

Temp

										SAE40
			SAE20 20W							SAE40

	SAE10W					SAE30

	-30			-15			0			15		25			30

						SAE10W - 30
						SAE15W - 40			20W - 40

8.1.3 Engine Oil Capacity

					(Unit : L)

			Lubrication Oil (including the oil in filter)
			DG150MI		7.4 (0.4)
			DG250MI		8.5 (0.4)	Value in ( ) shows the oil in filter
						＊
8.2 Checking Coolant / Water						＊
8.2 Checking Coolant / Water
✳	Also refer to the User’s Manual for Engine
✳	!		Danger

:Injuries

Before performing any equipment check or maintenance, stop the engine, and remove the engine key. A person performing the maintenance should always keep the key.

- 25 -

Image 25

Shindaiwa DG250MI, DG150MI specifications Checking Coolant / Water, Engine Oil Capacity, Viscosity and temperature

Contents

DG150MI DG250MI Table of Contents Introduction Suffocation from exhaust fume Safety GuidelinesElectrical Shock Injuries Fire Injuries to eyes and skinBurns Location of Warning labels Specification Matrix SpecificationsAlternator Engine Control Panel Unit Name of Generator Ambient Condition PartsExternal view Name Control panel Equipment Water Temperature Monitoring Lamp for temperature HighMonitor Display Engine Oil Monitoring Lamp for oil pressure low Battery Charge Monitoring Lamp charge lamp Fluid Level Monitoring Lamp DG250MI only GaugesTachometer DG250MI only Hour Meter Oil Pressure Gauge DG250MI only Water Temperature Gauge DG250MI onlyGenerator Gauges Lamp Switch Voltage Regulator and Throttle Handle Fuel Line Changeover Valve 3-way valveVoltage Regulator Throttle Handle Using fuel from built-in fuel tank Transport and InstallationUsing fuel from external fuel tank Transportation Transportation Installation Selecting Cable ConnectionElectrical damages Connecting Cable Load Connection Terminal Plate 3-Phase / 1-phase 2.1 200 2 1-Phase Output Terminals & Receptacles2.2 400 Grounding Work Earth Leakage Relay and Grounding Earth leakage breaker relay has activated Operation Check Checking Engine Oil Initialization and pre-checkElectrical Shock Injuries Fire Burns Checking Coolant / Water Viscosity and temperatureEngine Oil Capacity Checking Coolant reservoir tank / Adding coolant Checking Radiator / Adding water Coolant Capacity Checking Fan BeltTension Condition Checking Fuel Replacing the battery Checking BatteryChecking Fuel, Engine Oil, and Water leakage Initializing / preparation Operation Post startup check During Operation Adjustment During operation Stopping the Generator Protection⑥ Features Protection Feature List Connecting to External Fuel TankOverload Turn the lever for 3-way valve to B position Maintenance Generator side Oil Filter Change Oil ChangeModel Isuzu Part No Cleaning / Changing Fuel Filter Cleaning / Changing Air Filter Element Changing Coolant / Water Draining Water from Fuel TankModel Long-term Storage Storage Procedures Stacking Troubleshooting Symptoms Possible Cause Corrective Actions Generator Wiring Diagram Page Page Page Engine Wiring Diagram