11.2Stacking
!Danger
: Injuries
If you have to stack two generators in warehouse, always proceed with the following steps.
Ensure that there is no dent on bonnet, loosing bolt or no bolt in the generators.
Always place the generators on a flat and stable surface, to keep the equipment from sliding, And to be endurable for the total weight.
When lifting the equipment, always use a lift hook.
Always place ties (sleepers) on the marked points in the lower generator firstly and then stack the upper generator on it. All the ties should be the same size (dimension) and longer than the width of the lower generator.
Do not stack more than 2 units. The lower generator should be bigger than the upper generator in size and weight.
Do not operate the stacking/stacked generators.
12Troubleshooting
!Danger
:Electrical Shock
Do not operate the equipment, if the equipment or you are wet.
Before performing any equipment check or maintenance, stop the engine.
-40 -
