Shindaiwa DG250MI, DG150MI Connecting to External Fuel Tank, Protection Feature List, Overload

Protection Feature List

				Action
No.	Symptoms		Circuit	Automatic	Alarm Lamp
			Breaker	Engine	Flash
			OFF	Shutoff
1	High	Coolant	--
	temperature
2	Oil	pressure	--
	drop
	Insufficient
3	battery		--	--
	charge

Cause

Engine coolant temperature is too high (default at 110 degrees Celsius) Engine oil pressure dropped (default at 0.98x100kPa) (1.0kgf/cm2)

When the battery can no longer hold charge

4

5

6

7

Dirty filter or clogged

Low battery fluid

Low fuel

Current leaks to the earth

--

--

--

--

--

--

--

When an air filter becomes dirty and clogged

When the battery fluid is low

When the fuel falls below recommended level

When current leaks to the earth

(Only 3-Phase)

8 Overload -- --

When the circuit overloads

indicates the feature incorporated with DG250MI

※indicates the automatic feature in the both generators

9.5 Connecting○ to External Fuel Tank

! Caution

:Fire

￿ Always stop the engine, when working on the fuel line.

￿ Always wipe any drip of Diesel fuel or oil. Do not use this equipment when a leak is found.

Repair the equipment before use.

￿ Ensure that there is no fuel leakage on the fuel line after the fuel line working finished.

①

②

Turn the lever for 3-way valve to A position

Disconnect the P/T-3/8 plugs from both the external fuel intake and an external fuel return,

and connect the hoses from an external fuel tank, as shown below.

- 33 -