Push the reset button or stop the engine.
Restore
①
② position.
By the above procedure, you can reset the breakers to ON positions.
8 Initialization and pre-check
! | Danger |
| :Electrical Shock Injuries |
Before performing any equipment ・check or maintenance, stop the engine, and remove the engine key. A person performing the maintenance should always keep the key.
! Caution
:Fire Burns
When checking engine, always stop the engine, and keep away from fire.
Wait until the engine cools down, before performing any checks.
!Caution
:Fire ・
Always wipe any drip of fuel or oil. Do not use this equipment when a leak is found.
Repair the equipment before use.
8.1 Checking Engine Oil
Please refer to the user’s manual for Engine separately
✳When checking for engine oil, be sure to keep the equipment leveled, and insert the oil gauge all the way. Prior to starting the equipment, make sure to fill the engine oil to the MAX line through the oil filler.
<Caution>
If the equipment is not leveled, you cannot obtain accurate oil level.
Do not overfill the engine oil. The excessive amount of engine oil may damage the engine.
8.1.1 Selecting proper engine oil Use the API class CD grade or higher.
8.1.2 Use the engine oil for Diesel engine with proper viscosity, based on the temperature
(refer to the chart below).
- 24 -
