![](/images/new-backgrounds/1149635/14963539x1.webp)
Enable Firewall Protection
From the Advanced Setup Firewall screen, you can enable the SpeedStream 2614 firewall to block common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding. The firewall does not significantly affect system performance, so we advise leaving it enabled to protect your network users.
Enable Virtual Server
From the Advanced Setup screen, you can enable Virtual Server. If you configure the SpeedStream 2614 as a virtual server, remote users accessing services such as Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. Depending on the requested service (TCP/UDP port number), the SpeedStream 2614 redirects the external service request to the appropriate server located at another internal IP address.
To use the Virtual Server, the WAN interface must have a fixed IP address. Some of the more common TCP service ports include HTTP: 80, FTP: 21, Telnet: 23 and POP3: 110.
Figure 3-5. Advanced Setup Virtual Server
1.Specify the Private IP, Private Port, Type, and Public Port information.
2.Click Enter to save the settings and continue.
Automatically Entering Port Information
You can have the system automatically enter the most common application ports:
1.Scroll to the bottom of the Advanced Setup Virtual Server screen.
2.In the Well known services box, select the desired service.
3.Click in the box to the right of Copy to and select the line number to which the system will enter that