3benkonf.fm
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual 3-15
Nur für den internen Gebrauch First Steps and User Configuration
Logging on
2. You can now configure further parameters or click OK. This returns you to the Logon
dialog.
Support system feature
"automatic line seizure" If the parameter Support system feature "automatic line sei-
zure" was activated on the connected system, this parameter
must be activated in optiClient office. This causes optiClient of-
fice to behave as a normal telephone, i.e., the trunk access num-
ber must be dialed for external numbers, and internal stations
can be reached directly.
The behavior of the optiClient phone is analogous to that of the
system. The parameter Support system feature "automatic
line seizure" need not be explicitly selected in the optiClient
phone, since the optiClient phone behaves like an optiPoint ter-
minal, which means that no trunk access code must be dialed for
external numbers. Internal stations can be reach ed via the auto-
matically generated internal key.
>In addition to lowering data volumes/bandwidth requirement across the line, ac-
tivated voice compression reduces voice transmission quality.
This option must only be activated if optiClient is logged onto a HG1500.
>To check whether the network path and/or the communication server (HG1500)
is available, optiClient sends a control message every minute to which the com-
munication server must respond. If this response message fails to appear, op-
tiClient displays an advisory message and the display information is deleted.
Every five minutes, optiClient tries to determine whether the network path and/
or communication server is available again by sending control messages. Once
a response is received, the optiClient automatically logs on to the communicati-
on server again.