Siemens AX72 Calling

Calling

left page (10) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)

VAR Language: en; VAR issue date: 050613

Change phonecode

You define the phone code (4-8 digits)

when you call up a protected function for

the first time. It is then valid for all phone-

code protected functions. If the wrong

code is entered three times then the

phone will be locked. Contact Siemens

Customer Care for instructions on how to

unlock your pone.

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter the

PUK (MASTER PIN), provided by your serv-

ice provider with the SIM card, according

to instructions. If the PUK (MASTER PIN)

has been lost, please contact your service

provider.

Preventing accidental activation

Even if PIN control is deactivated confir-

mation is required to switch on the phone.

This prevents the phone from being

switched on accidentally, e.g. when car-

ried in a pocket or whilst you are on an

aircraft.

Press and hold the On/Off/End key B

and confirm with §OK§. The phone

switches on.

Calling

Dialling with number keys

The phone must be switched on (standby

mode). Dial number (always with area

code, if necessary with international dial-

ling code). To dial international dialling

code press and hold 0 until a "+" is dis-

played. Press §+List§ and select country.

Short press §Clear§ to clear the last digit, a

long press clears the entire phone

number. To dial press the Call key A.

End call

Press the End key B briefly. Press this

key even if the person on the other end of

the line has hung up first.

Set volume

Use navigation key E to start adjusting

the volume during conversation. Set vol-

ume with navigation keyG.

If a Car Kit is used, its volume setting will

not affect the usual setting on the phone.

Redial

To redial numbers that were dialled previ-

ously, press the Call Key A once, pick up

the required phone number from the list

with G, then press A again.

If the number is busy

Press §Auto dial§ for automatically dialling

the phone number ten times at increas-

ing time intervalls or press §Call back§ (L)

for phone ringing when the busy number

is free. Press §Prompt§ and a beep reminds

you to redial the dispayed phone number

after 15 minutes.

Accept call

The phone must be switched on (standby

mode). An incoming call will interrupt

any other use of the phone. Press §Answer§

or A.

Please make sure you have accepted the call

before holding the phone to your ear. This will

avoid damage to your hearing from loud ring

tones!