Setup
24
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX72_Pegasus_DTC\out-
left page (24) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
VAR Language: en; VAR issue date: 050613
Set up call divert (example):
The most common condition for call
divert is, for example:
• All Unanswered
Includes the conditions Not reachable, No
reply, Busy, see below.
All Unanswered ¢D ¢Set
¢J(enter the phone number, to
which the call should be diverted) ¢§OK§.
After a short pause, the setting is
confirmed by the network.
• All calls
All calls are diverted. n is shown in the
top line of the display in standby mode.
Other possibilities for divert:
Not reachable, No reply, Busy
• Status check
You can check the current divert status
for all conditions.
After a short pause, the current situation
is transmitted by the network and
displayed.
pCondition set.
oNot set.
sDisplay if status is unknown
(e.g.with a new SIM card).
• Clear all
All set diverts are cleared.
Minute beep
During a call, you will hear a beep after
each minute as a reminder of the time
elapsed. The recipient does not hear this
beep.
Clock§Menu§ ¢m ¢Clock ¢Selectfunction.
Time/date
The clock must be set to the right time
once at start-up.
§Change§ ¢Enter the date first, then
thetime.
Time zones
Set the time zone for your area.
Time format
Select 24h or 12h.
Date format
DD.MM.YYYY or MM/DD/YYYY
Buddhist year
Switch to the Buddhist year (not on all
phone models).
Show clock
Activate/deactivate time display in
stand-by mode.
Automatic switch off
The phone switches off each day at the
set time.
Activate:
§Time§ ¢J Enter time (24-hour-clock)
¢§OK§.
Deactivate:
§Manual§ ¢§OK§
Connectivity§Menu§ ¢m ¢Connectivity
¢Selectfunction.
GPRS b
§Yes§ / §No§
Switch GPRS function on/off.