Siemens AX72 manual Text entry

right page (11) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)

Text entry 11

VAR Language:

© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX72_Pegasus_DTC\out-

A phone number transmitted by the net- work is displayed or the corresponding name if it is contained in the Phonebook (p. 14) or Addressbook (p. 15). A picture may also appear (settings p. 15).

Reject call

§Reject§ or B press briefly.

Handsfree

You can put the phone aside during a call. You can then hear the caller via the loudspeaker.

Activate handsfree function with §Handsfr.§ and switch on with §Yes§.

Adjust the volume with E. Pressing §Handsfr.§ switches off "handsfree talking".

Always switch off "handsfree talking" before holding the phone to your ear! This will avoid damage to your hearing!

Swapping between 2 calls b

Make a new connection during a call with ymenu§ ¢Hold ¢ J(dial a new phone number). With y menu§ ¢ Swap you can swap back and forth between both calls.

If you are called during a phone call and you can hear the "call waiting tone"

(p. 23), you can accept the waiting call with §Swap§,putting the current call on hold to do so.

Swap back and forth between the calls see above or end the current call with B and accept the new call with §Answer§.

Conferenceb

Call up to 5 parties and link them togeth- er in a conference call. Make a new con-

¢

nectionJduring a call with ymenu§ Hold ¢ (dial a new phone number).

The current call is set on hold. With y menu§ ¢ Conference you can join the held call when the connection is established.

Repeat this procedure until all partici- pants are linked together.

All calls in the conference are ended si- multaneously when the End key B is pressed.

Direct call

If this is active, only one number can be dialled.

§Menu§ ¢m¢Security ¢Direct call Press D and enter phone code. The phone code (4- to 8-digits) is set by you and entered at the first security setting. Please note this code down (see also p. 9)! Confirm code input with §OK§. Press §Change§ and enter number (press · to select phone number from the Adress- book p. 15 or Phonebook p. 14). Confirm "On" with §OK§.

To dial, press and hold the right soft key.

To switch direct call off, press and hold . Enter phone code and confirm with §OK§. Press §Change§ and Confirm Off with §OK§.

Text entry

Text entry without T9

Press number key repeatedly until the re- quired letter appears. After a brief interval the cursor will advance. Example:

2Press once briefly to type the let- ter a, twice to type b, etc. Press and hold to write the number.

Ä,ä,1-9Umlauts and numbers are dis- played after the relevant letters.

en; VAR issue date: 050613