Industry Automation and Drive Technologies - SCE
5.2Configuring the Hardware
6.With a double click, open the configuration tool for the ’Hardware’. (→ Hardware)
7. Open the hardware catalog by clicking on the symbol '
’. (→ 
)
Insert the ’Mounting channel’ with a double click (→ SIMATIC 300 → RACK 300
→Mounting channel).
Note
A configuration table for configuring Rack 0 is displayed automatically.
TIA Training Document | Page 13 of 65 |
Module E11 |
|
Status: 01/2010 | Radio Frequency Identification (RFID) with SIMATIC |
RF180C |
|
