Industry Automation and Drive Technologies - SCE
5.11FB10 Reader_Control Program
Now, we are going to program the following in FB10: the control program for the control commands of a reader, and the call of FB45.
In addition, the attendance time of the transponder is to be recorded.
Generating FB10
First, set up a new function block FB10.
Then, set up IN variables
Next, set up OUT variables
TIA Training Document | Page 51 of 65 |
Module E11 |
|
Status: 01/2010 | Radio Frequency Identification (RFID) with SIMATIC |
RF180C |
|
