Industry Automation and Drive Technologies - SCE
5.6Programming a Restart or Warm Restart
A restart of the MOBYIM (interface module) is carried out by setting the variable "init_run". With "init_run“, the IM and FB45 are
"init_run“ is necessary after the following:
•Switching on the SIMATIC (OB 100)
•Switching on the power supply for the IM
•PROFINET communication is interrupted
•An error indication by the variable "error_BUS"
•A transponder type change; for example from RF300 to ISO or vice versa
•Changing an INPUT parameter in DB45 (Reader_Parameter)
Generating OB100
Open OB100 and enter the program
Save and close OB100
TIA Training Document | Page 33 of 65 |
Module E11 |
|
Status: 01/2010 | Radio Frequency Identification (RFID) with SIMATIC |
RF180C |
|
