| Industry Automation and Drive Technologies - SCE | |
|
| PAGE |
1 | PREFACE | 5 |
2 | Notes regarding the usage of CPU | 7 |
3 | Notes regarding the SIMATIC RFID components | 8 |
4 | RFID Fundamentals | 9 |
5 | Starting up an RFID project with CPU | 10 |
5.1 | Setting Up a New Project | 11 |
5.2 | Configuring the Hardware | 13 |
5.3 | Assigning a Device Name | 20 |
5.4 | Inserting UDT Blocks and FB45 | 22 |
5.5 | Generating Data Blocks | 23 |
5.6 | Programming a Restart or Warm Restart | 33 |
5.7 | FC11 Function for a Command or Request | 34 |
5.8 | Basics of Entries at Command Block FC11 | 36 |
5.9 | Command String | 39 |
5.10 | Basics of FB45 and DB45 | 40 |
5.11 | FB10 Reader_Control Program | 51 |
5.12 | FB1 Control Program | 55 |
5.13 | OB1 Program Call | 61 |
5.14 | Variable Table STATUS_SLG_1 | 62 |
5.15 | Variable Table STATUS_SLG_2 | 63 |
5.16 | Symbol Table | 64 |
5.17 | Block Folder | 65 |
5.18 | DB49 Data View | 65 |
TIA Training Document | Page 3 of 65 |
Module E11 |
|
Status: 01/2010 | Radio Frequency Identification (RFID) with SIMATIC |
RF180C |
|
