SELECT: 1. ENabling (main menu) 2. DISabling
3.INFO polling
4.other functions
FUNCTIONS: 1. function
(4)2. system TEST
3.printout
4.configuration
page 8 
FUNCTIONS: | 1. | switching alarm org. | Switching manned $ unmanned via menu |
(4.1) | 2. | set time / date | Set or adjust time and date |
SYSTEM TEST: 1. horn/al.contact/RT
(4.2) 2. lamps/battery
3. fire and contr.zones
SYSTEM TEST: 1. horn
(4.2.1) 2. alarm contacts
3.RT−alarm
4.RT−fault
SYSTEM Test: | 1. | lamps/display |
(4.2.2) | 2. | battery |
SYSTEM TEST: 1. single zone test
(4.2.3) 2. zone range test 3. set control zones
Activate all ’horns’ for 30 sec
Activate all ’alarm contacts’ for 30 sec. Activate ’remote alarm’ for 30 sec. Activate ’remote fault’ for 30 sec.
Activate all LEDs and LCD for 10 sec. Load battery for 10 sec.
Set detectors to ’Detector test’ per zone Set detectors to ’Detector test’ zone X...Y Set control zone to ’control zone Test’ X..Y
PRINT: 1. system status
(4.3) 2. event memory/alarm counter
3.configuration/user text
4.configuration zone/line/LON
PRINT: 1. fault (4.3.1) 2. isolation
3.pre−alarm
4.techn.alarm /element status
PRINT: 1. event memory (4.3.2) 2. alarm counter
PRINT: 1. configuration system (4.3.3) 2. configuration coll. line
3.user text detector zn/elem
4.user text ConTrol zone
PRINT: 1. configuration det. zones (4.3.4) 2. configuration addr. lines 3. configuration LON devices
Print current fault messages
Print current turned off system components Print current information messages
Print current ELEMENT states
Print event memory list
Print alarm counter readings
Print general parameter settings Print parameter settings coll. lines
Print user texts detector zones / elements Print user texts control zones
Print parameter settings detector zones Print parameter settings addr. lines Print parameter settings
7
Fire & Security Products | |
Siemens Building Technologies Group | 02.2004 |
