Siemens FC330A manual Set time and date, Purpuse and Principle

Set time and date

i Changeover summertime to wintertime: manually p automatically p

Purpuse and Principle

Time and date are set by the service engineer when the system is put into service. Under normal conditions there is no need to correct time and date.

The changeover from summertime to wintertime and vice versa is performed automatically for Central European Time. Central European Time is valid for Western Europe, most of Eastern Europe an parts of Russia. The switchover from summertime to wintertime is performed at the last sunday in March, vise versa at the last sunday in October. Differing automatic switching ti- mes are not possible.

Only due to an electronical distortion or a complete power failure (mains and battery interrupted) the system sets time and date to “default”.

Set time and date

Log in with at least ”access level 2”.
1. Press St .
Ü Display shows	*

START system operating > enter password?

hm /Stop: end operating

2.Enter the password and press Ü Display shows

ok .

*

SELECT: 1. ENabling (main menu) 2. DISabling

3.INFO polling

4.other functions

3.	Select option 4. ä 1. ä 2.
			set TIME:	##:##:##
	Ü Display shows	*	> new time: hour.min.sec.?
			hm: back to menu	Stop: end operating
4.	Enter the current time and press ok .
			set DATE:	##.##.##
	Ü Display shows	*	> new date: day.mon.year?
5.	Enter the current date and press ok .		hm: back to menu	Stop: end operating
	Ü Time and date are set to the current va-
	lues.	*	FUNCTIONS:	1. switching alarm org.
	Ü Display shows		(4.1)	2. set time / date

6. Use St to terminate the time and date setting.

52

Fire & Security Products	e1973c-16
Siemens Building Technologies Group	02.2004