Parameterization, Flash programming
26 Parameterization, Flash programming
Parameters are set for the FC700A fire detection system via the maintenance
PC by means of the software tool set 'SWE700A'.
Flash programming is only relevant if B3Q700 is used as replacement for FC700A
New software is programmed by means of the 'Flash Tool' software. For the modules B3Q700 the application software is now loaded into the Flash ROM via the maintenance PC by means of the 'Flash Tool' software.
Details see
B3Q700 (FT700A)
Control terminal
ST2
ST2
-for flash programming new application software
-download all system data
Modem box
RS232
B3D021
FC | Maintenance PC with |
| 'SWE700A' + 'FlashTool' |
| software |
B3Q700 (FC700A)
Control unit | E3M... |
26.1Functions
–Load new application software (Flash) if necessary
–Prepare/supplement structure of the system
–Define user functions
–Specify/correct user text
–Detector localization
–Data transfer of user functions to control unit
26.2Modules
Component | Description | Notes | |
B3D021 | 505259 | Modem box for SWE700A (DUAL RS232 ITF) | Complete with flat cable 20 conductors, |
|
|
| L=0.2m |
- | 505330 | Flat cable L=0,2m | As spare part |
M3C700 | A5Q00004798 | USB Dongle | Key for SWE700A |
| 59 |
|
|
Siemens Building Technologies | |
Fire & Security Products | 03.2004 |
